Airfree incorporates an automatic energy-saving feature by automatically shutting off the ceramic core when it has reached a temperature range to facilitate air convection (air in the room is drawn into the machine to destroy impurities, contaminants and odors). The ceramic core shuts down for a few minutes, the indicator light turns off, and the top light emitting diode (L.E.D.) blinks. Airfree continues to sterilize the air during this time. This indicates the conservation of electric power consumption and the preservation of the ceramic core.
Another contributory factor to Airfree's blinking occurrence is the ambient air (air in the environment). When the ambient air reaches 95 degrees F (35 degrees Celsius), Airfree auto-regulates itself with the ceramic core “shut off” for a few minutes but still continues with its sterilizing activity (the blinking of the top light signals this occurrence). In this process energy is conserved and Airfree's safety mechanism is enhanced.
Airfree incorporates state of the art electronics detecting any improper placementor device malfunctioning. If the top blue light does not stop blinking, please ensure that your Airfree unit is in the upright position. If the top and bottom air inlets are free of blockage, the blinking may be due to a faulty electrical outlet. Please plug it in into a proper outlet. If in the next 10 minutes the top light continues blinking and your Airfree unit is correctly installed, this indicates that the device may be malfunctioning.
Airfree incinerates microorganisms at its heated capillaries. Contaminated air is dragged into Airfree’s ceramic core by air convection and microorganisms are destroyed at high temperatures regardless of how resistant and dangerous they might be.
No. Airfree’s new technology uses heat to purify the air. No side effects, no emissions, NO IONS, nor new particles are generated. Airfree should be used in all homes and offices quietly, constantly and efficiently purifying the air.
Airfree P80 was designed for rooms up to 344.4 sq. ft. (32m²) or 2825 cu. ft. (80 m³); Airfree P60 was designed for rooms up to 258 sq. ft. (24m²) or 2118 cu. ft. (60m³)
Yes, as long as it has at least 400cu.ft (11m³)*. Airfree should not be placed under shelves or its efficiency will be reduced.
* as reference 400cu.ft (11m³) is approximately 7’x7’
Check the top lid and if warm Airfree is working.
No. Airfree will just reduce air pollution in the corridor’s area.
Yes. Please remember such a room must have at least 400cu.ft (11m3)*.
* as a reference 400cu.ft is approximately 7’x7’
Yes. Unlike the air filters in the market Airfree is more efficient with smallest microorganisms as they are easily carried by Airfree’s airflow into its heated ceramic core.
No. Airfree must always be plugged in the same room 24 hours a day. Airfree’s patented technology works gradually and cannot have its cycle interrupted. Moving it from one room to another will interrupt the cycle.
No. Airfree must always be on.
Airfree will take approximately the same time to recover the previous reduced contamination level.
Not at all. CADR is not designed to test the Airfree technology.
The AHAM seal (usually found on the back of an air cleaner’s box) lists three Clean Air Delivery Rate (CADR) numbers: one for tobacco smoke, one for pollen and one for dust. The CADR indicates volume of filtered air delivered by an air cleaner. The higher the tobacco smoke, pollen and dust numbers, the faster the unit filters the air.
The main reason why CADR is not designed for Airfree is because Airfree does not filter but destroys microorganisms instead, CADR only applies to volume of filtered air delivered by an air cleaner as stated above.
CADR does not measure microorganism reduction like mould and bacteria only detectable by a microbiology lab.
Airfree destroys (not trap or attract to other surface) any microorganism regardless of how small they might be. 99,99% of all organic particles are fully destroyed when passing through the Airfree U.S. patented ceramic core.
Mould reduction in the atmosphere causes a reduction in the mould dependant dust mite population.
Airfree also destroys the harmful toxins and fungus freed by dust mite faeces that trigger respiratory allergies.
As mentioned before, Airfree eliminates airborne microorganisms included fungi and spores. By eliminating spores no new colonies will be formed, meaning less future fungi and spores in the air.
Those microscopic microorganisms are easily eliminated inside Airfree’s ceramic core capillaries. Inside temperature of Airfree capillaries is triple the temperature required to incinerate them. Airfree is your largest ally in respiratory disease prevention.
Yes, Airfree reduces any kind of organic smell in the ambience including tobacco.
No. Airfree’s sterilization process is natural.
No. Airfree does not increase room temperature. To have an idea 2 Airfrees plugged in the same room will contribute as much heat as the presence of one adult in that same room.
No. Airfree’s technology uses heat and not filters nor dangerous emissions.
No. Airfree’s consumption is just 48 Watts for P80, 45 Watts for P60.
No. The anti-stress light has an aesthetic effect and can be relaxing too or simply used as a night light in children or newborn bed rooms. According to chromo therapy the blue light has calming and relaxing effect.
Airfree's patented Technology TSS™ (Thermodynamic Sterilizing System) generates airflow quietly through air convection and sterilizes air at high temperatures. The airflow generated by Airfree happens by air convection and equals 14 m³/hr according to the SP Swedish National Laboratory test. Cooler and contaminated air is then continuously drawn into Airfree®. There is no need for a noisy fan. Airfree®'s exclusive TSS™ technology has been proven to be effective by some of the world's most prestigious independent laboratories in six different countries in real working conditions.